Plylok® is a premium plied rubber belt and is now part of our flagship product line of Plylok Supreme®. Plylok® is designed for tension ranges from 2 ply 160 PIW to 4 ply 440 PIW and can be used in a variety of applications including coal, phosphate, ore, sand, salt, wood products, and aggregate.

PLYLOK® CARCASS

The Plylok® carcass has been redesigned to distinguish it as a premium rubber belt line in the industrial markets. It has taken on the same characteristics as the Plylok Supreme® carcass. Improvements, such as increased between ply skim gauges and converting the Plylok® carcass to a poly/nylon construction, enabled Fenner Dunlop to include Plylok® in the premium Plylok Supreme® line of belting products. These technological advances will help improve load support, impact, rip, and tear resistance. This transition makes Plylok® a cost effective alternative for decreasing down time and extending the life of the belt, resulting in more material conveyed and savings to the bottom line. Plylok® can be furnished in an all nylon construction.

Fenner Dunlop, with its many years as a textile manufacturer, has the ability to match the carcass design and the carcass materials to the application. The Plylok® carcass, with tension ranges to 440 PIW, is an excellent choice for conveying products with lower tension requirements.

Plylok® is also the belt of choice when service conditions dictate the use of an all nylon carcass, such as a strong alkali atmosphere with a high PH or the use of an all polyester carcass in a strong acidic environment with a low PH. the proper carcass material in many applications will determine total belt life.

PLYLOK® COVERS

Plylok® can be furnished in a variety of covers that are determined by the service conditions.

Fenner Dunlop stocks the following belts, as these specifications are required on a continuous basis:

PL2-220 1/8" x 3/64" GRA2, MOR
PL2-220 3/16" x 1/16" GRA2, MOR, OHR, EPDM

PL3-330 3/16" x 1/16" GRA2, MOR
PL3-330 1/4" x 1/16" GRA2

PL4-440 1/4" x 1/16" GRA2

- GRA2 is designed for general conveying.
- MOR is recommended for wood chips.